Author Topic: Making a Doll/Materials Used for Fatty tissue  (Read 263 times)

0 Members and 1 Guest are viewing this topic.

zmolding

  • New Resident
  • **
  • Posts: 4
Making a Doll/Materials Used for Fatty tissue
« on: December 12, 2017, 04:23:17 AM »
Hello everyone,
I'm new here and this is my first post.
I joined because I'm designing my own doll and could use some pointers. Also could probably help out others who are pursuing the same goals.

Anyway I wanted to know if anyone has found a good material to mimic fatty tissue for breasts or a bottom.
I understand that breasts made with just silicone can be "hard".
I want to give my doll that giggly effect.
I was thinking about using eco-flex 30 for the outer flesh coat and homemade silly putty for the giggle??

I'm out of ideas here...Anyone have any suggestions?
Thanks!

Szalinski

  • Sr. Resident
  • ****
  • Posts: 1181
  • Reality is for those with no imagination.
    • Chris'Z Corner
Re: Making a Doll/Materials Used for Fatty tissue
« Reply #1 on: December 12, 2017, 01:13:49 PM »
Most manufacturers fill their doll's "soft parts" with a gel (one that's compatible with the rest of the doll, naturally).
Heaven help me, I have been dating a real human female.
.........And enjoying it!

My cross country bike ride | Flickr albums for my dolls

zmolding

  • New Resident
  • **
  • Posts: 4
Re: Making a Doll/Materials Used for Fatty tissue
« Reply #2 on: December 12, 2017, 07:37:43 PM »
Thanks for the help Szalinski


Any suggestions on what those materials are or where I could get them?
I use smooth on silicone rubbers so the best gel material from them would probably be eco-flex gel but I'm afraid it will be too hard in a large mass like breasts.

incred

  • Sr. Resident
  • ****
  • Posts: 5326
  • Bay State
    • Incredidoll
Re: Making a Doll/Materials Used for Fatty tissue
« Reply #3 on: December 13, 2017, 08:30:14 PM »
Not that I'm a doll maker, but you would want a platinum gel silicone for softness and weight. Silly Puddy would be too hard.

There is a technique to pouring a silicone skin, then the gel, then putting in the foam cores, then mold half's together, and pouring the rest of the doll. It all takes timing and experience that I don't have.

It would be a lot easier to work with a doll manufacturer to design a head/face, or whole doll.

zmolding

  • New Resident
  • **
  • Posts: 4
Re: Making a Doll/Materials Used for Fatty tissue
« Reply #4 on: December 14, 2017, 02:34:58 PM »
I agree with you incred,
having silly putty could be too hard and would definitely add some unwanted weight to the doll.
It was just an idea though.

I will be using the method you mentioned for the butt of the doll. Pouring a skin layer of silicone and filling the rest with silicone gel.
I think doing this will make the butt more realistic since they are muscle not fat.
As far as the breasts go, I'm going to keep experimenting to get the natural jiggle effect I'm looking for.

Ps. I know that it would be much easier to work with a doll manufacturer but I personally would just like to make it myself. It would give me a sense of pride being able to say that I made her. And I've already put a lot of time and money it the project lol


zmolding

  • New Resident
  • **
  • Posts: 4
Re: Making a Doll/Materials Used for Fatty tissue
« Reply #6 on: December 15, 2017, 11:44:21 AM »
Thanks for the support! ;D

Hornet77

  • Lurker
  • *
  • Posts: 1
Re: Making a Doll/Materials Used for Fatty tissue
« Reply #7 on: January 06, 2018, 07:41:25 AM »
Platsil Gel-00 is what you need to get the softness.