Author Topic: stuffing an inflatable doll  (Read 215 times)

0 Members and 1 Guest are viewing this topic.

mikepb

  • Lurker
  • *
  • Posts: 1
stuffing an inflatable doll
« on: November 15, 2017, 08:43:13 PM »
Hello, I'm new here and would like to know if there are any instructions/guidelines for the process of stuffing an inflatable doll.

thanks

FlashGordoll

  • Sr. Resident
  • ****
  • Posts: 1048
  • She ain't heavy she's just rubber
Re: stuffing an inflatable doll
« Reply #1 on: November 16, 2017, 10:30:06 AM »
Hello,
There's a thread here:  http://ourdollcommunity.com/forum/index.php?topic=4229.0 (Half way down) that shows a latex doll that's been stuffed with polyester fibre fill.  Not much in the way of instructions though.

I'd assume that the doll was stuffed by removing the head and stuffing the fibre fill in from the neck opening.  :-\  The tricky bit will be getting the stuffing in and getting it to look smooth and not clumpy.

Best of luck, let us know how you get on. ;)

coralsheep91

  • Sr. Resident
  • ****
  • Posts: 788
Re: stuffing an inflatable doll
« Reply #2 on: November 16, 2017, 07:39:46 PM »
I stuffed a latex dolls years ago.  I used Polly Fill from Walmart.

I removed the head to put the Polly Fill in.

I recall the arms were not easy but the results were lots better than air.

I looked for the pictures but, that's been too many laptops ago...

Don't over stuff her or she will be lumpy.

Coral
Layla's , Nicky's and Nicole Ann's pictures are here: http://www.ourdollcommunity.com/gallery/index.php?cat=10378

grenouille

  • Sr. Resident
  • ****
  • Posts: 1075
Re: stuffing an inflatable doll
« Reply #3 on: December 01, 2017, 06:43:19 PM »
I fill my deno doll regularly  8)

Mahtek

  • Town Council
  • Sr. Resident
  • *****
  • Posts: 4032
  • Walking on the Bluegrass
Re: stuffing an inflatable doll
« Reply #4 on: December 03, 2017, 11:06:38 AM »
Home is where your dolls are.