Author Topic: Best stuff evah! Silicone tear and surface repair.  (Read 310 times)

0 Members and 1 Guest are viewing this topic.

Smoke

  • Sr. Resident
  • ****
  • Posts: 1200
  • Town Drunk.
Best stuff evah! Silicone tear and surface repair.
« on: September 30, 2017, 07:40:11 PM »
Fuse FX . Liquid Sheen and BondFX.










Use liquid sheen when you don't want a glossy silicone finish. Leaves a finish similar to eggshell paint. Working time about  3-5 minutes. Fully cures in less than an hour. Perfect for small tears and silicone surface imperfections. Paint able with Smooth-on psycho paint afterwards. Don't bother fucking around trying to tint this stuff. You don't have time before it cures. Cures softer then sil-poxy. This is platinum 2-part silicone and it sticks to cured platinum silicone with out any special surface prep save cleaning the area with alcohol first.

Use BondFX same as liquid sheen. This is also platinum 2-part. leaves a very glossy finish if used to repair surface imperfections. Needs to be matted down with matting powder if you don't want a glossy finish. This stuff can be used on tin or platinum silicone. If you are working on a tin silicone surface this will stick to it and then allow the surface to be painted or repaired with platinum silicone paint. Same working and cure time as liquid sheen. The answer to repairing platinum silicone and making it stick is these two products right here. :thumb:
Humble servant of CJ's Harem .




If the Ladies don't find you handsome... Get a doll.


Smoke

  • Sr. Resident
  • ****
  • Posts: 1200
  • Town Drunk.
Humble servant of CJ's Harem .




If the Ladies don't find you handsome... Get a doll.

Ceej

  • Town Council
  • Sr. Resident
  • *****
  • Posts: 7219
Re: Best stuff evah! Silicone tear and surface repair.
« Reply #3 on: October 01, 2017, 07:11:32 AM »
Cool  :)
"Leaving it to the imagination" is highly overrated.




Sandy is a B6 F1 Realdoll. In addition she has several F1 expression faces as well as standard F10 and f11 faces. She also has several sets of reuseable "Real Breast" prosthetic breasts.

pygmalion2

  • Sr. Resident
  • ****
  • Posts: 478
Re: Best stuff evah! Silicone tear and surface repair.
« Reply #4 on: October 01, 2017, 08:42:46 PM »
Hey Smoke   - glad you found the stuff from FuseFX
A less expensive "sealer" than the bondFX is mixing silicone thinner with silpoxy.  For matting add some matting powder.

http://www.sculpturesupply.com/list.php?sf=subcategory&vl=FuseFX+Matting+Powder&cat=Paints
Realdolls and Sinthetics

Mahtek

  • Town Council
  • Sr. Resident
  • *****
  • Posts: 4042
  • Walking on the Bluegrass
Re: Best stuff evah! Silicone tear and surface repair.
« Reply #5 on: October 01, 2017, 10:37:12 PM »
In the USA, it can be found here;

http://www.theengineerguy.com/Products_2/Fuse-FX/

Mahtek & his Ladies
Home is where your dolls are.

Aaron

  • New Resident
  • **
  • Posts: 53
Re: Best stuff evah! Silicone tear and surface repair.
« Reply #6 on: October 23, 2017, 10:09:40 PM »
Thank you for your share :D
the highest quality sex love doll in xosexdoll.

ourdoll1

  • Mayor
  • Sr. Resident
  • *****
  • Posts: 4398
Re: Best stuff evah! Silicone tear and surface repair.
« Reply #7 on: November 03, 2017, 08:06:37 AM »
 :thumb: Nice find Smoke!

Szalinski

  • Sr. Resident
  • ****
  • Posts: 1181
  • Reality is for those with no imagination.
    • Chris'Z Corner
Re: Best stuff evah! Silicone tear and surface repair.
« Reply #8 on: November 15, 2017, 09:26:09 PM »
Excellent! Sharon's starting to show some serious wear, and could use some touch up. I like that it comes in a matte finish too (the talc suggestion went real bad with me). Especially now as she has become irreplaceable (all my dolls have, really :( ).

As far as not being able to add tint because of the curing time, have you tried adding the tint before mixing them?
Heaven help me, I have been dating a real human female.
.........And enjoying it!

My cross country bike ride | Flickr albums for my dolls